If you are having a Clearwater air conditioning repair and replacement company install a new unit in your home, make sure that the unit you have purchased is one that suits your needs and not one bigger than what you need. You will base the size of the unit you purchase on the size of your home. Also keep in mind that the cheaper the unit is, the less efficient it will be, which will mean higher energy bills at the end of the month.

It is also critical to make sure that air conditioning repair experts come in regularly to check your unit to ensure that it is working properly. These experts have tools that will help them ensure the unit is working at full capacity. They will also remove any blockages or clogged drains that might be causing efficiency problems. Another part of routine maintenance that AC repair experts do is changing out dusty air filters to make sure the air flows properly through your home.

You might also want to consider using fans placed throughout your home to help increase the flow of air in your home. This will help cool your home and prevent you from needing the air on as much as you would without the fans on.

Ideally, your indoor air quality strategy should involve more than one method. Here are three effective strategies that can help improve the air you breathe.

Advanced filtration
Standard, disposable air filters are typically able to trap only about 5 percent to 15 percent of particles. Advanced options are available:

• HEPA filters, or high efficiency particulate air filters, do a superior job of capturing particles that can irritate allergies or other respiratory problems. They can trap 99.97 percent of particles small as .3 microns across. True HEPA filters are too restrictive for all or the air circulated thru your HVAC, so only a portion of that air should be channelled thru the HEPA. Doing this over a long period of time geatly increases the IAQ of a home.

• Extended-life filters have large surfaces, require minimal maintenance and trap extremely small contaminants much better than even the best 1″ throw-away filters, and since they normally only require changing once or twice a year, are more economical to maintain.

• Air purification systems that utilize more than one method of killing microorganisms and trapping contaminants can clean air as many as eight times an hour.

UV light
UV light purification systems destroy microorganisms such as viruses and bacteria by rupturing their cellular structure. The damaged microorganism is unable to repair or reproduce itself and is rendered harmless. Ultraviolet light is a natural sterilizer due to its high frequency.

Dehumidification
A high humidity level may be uncomfortable for you, but it makes for prime growing conditions for microorganisms, such as mold. Mold can grow on HVAC equipment, around moist windowsills, in damp bathrooms, inside walls and elsewhere. Whole-house dehumidifiers can remove several gallons of moisture from your air every day.
By balancing relative humidity levels around 50 percent, you can stem the growth of microorganisms. A UV light system can work in conjunction with these efforts by killing any microorganisms that do happen to be present. Advanced filtration systems capture remaining particles such as dust, dust mites, pollen and other allergens.

Don’t be daunted by poor indoor air quality. There are many options to improve it. Questions? Please contact the experts at Andy’s Air, We’re happy to help.

While your home’s size is part of the equation, there are several additional factors you should consider when determining load calculation. What is load calculation? It is the the process of determining how much heating and cooling you need for your home. In addition, if you are also replacing ductwork, today’s better insulated duct systems can help lower your home’s need for a larger unit and a properly engineered and installed duct system can help eliminate hot and cold spots within the home.

Local temperature extremes should play a major role in sizing your system. Here in Florida we get more than our fair share of summer heat, and our average summer highs will definitely have a bearing on how big your HVAC system should be.

The shape and the orientation of your home will also affect the choice. For instance, the heating needs of a two-story home with several large, sunny, south-facing windows are very different from those of a shaded one-story house, even if they have the same amount of indoor space.

The amount of insulation in your home, the air infiltration rate, the number of occupants, and your desired comfort level are other factors that will affect your decision. It is also a good idea to factor in heat given off by lights and other major appliances.

Rather than risking poor results by a contractor who goes strictly by square footage or another “rule of thumb,” ask your heating and cooling contractor if they use the ACCA Manual J protocol for performing load calculation. That’s the recommended method published by the Air Conditioning Contractors of America.Consumer Reports warns to “be leery of a contractor who bases estimates merely on house size or vague rules of thumb.”

Done correctly, a load calculation can save you money by allowing you to purchase a smaller unit than you already have and reduce your energy use by reducing inefficiency. Contact the professionals at Andy’s Air Inc, A Clearwater HVAC installation company, for any of your AC needs.

Low Efficiency Furnace

This is a bit of a misnomer as even entry level furnaces have efficiency ratings of at least 80%. For comparison, if you’re still using an old gravity furnace, your efficiency rating could be lower than 50%. Modern furnaces are built to conserve, and while you won’t receive all of the bells and whistles that tend to accompany high efficiency models, you will get a durable, affordable furnace that will last a long time.

Medium Efficiency Furnaces

Furnaces in the mid-efficiency range have AFUE ratings of between 85% and 92% and are therefore significantly better than those in the entry level range. They also have some of the higher end features available in high efficiency models like programmability and the option for zone control. Because they are still mid-range, they are affordable without skimping too much on features too – a must for any homeowner wanting to save money on both ends.

High Efficiency Furnaces

The highest efficiency furnaces on the market are very different from those you would have purchased even just 10 years ago. Top end furnaces can carry AFUE ratings of up to 95% with a boat load of added features to conserve energy. These features include two stage gas valves so you can maintain a low BTU heating system for most of the year but crank up the heat when the temperature outside drops too low. They are also programmable, which allows you to easily change the temperature settings, fan speed and more from anywhere in the house.
And while they cost more to install, high efficiency furnaces use less energy over their lifespan, last longer and are more environmentally friendly than any other furnaces on the market today.

For more information or a consultation about your furnace efficiency, make sure you speak to a Quality Clearwater AC Repair Company, like Andy’s Air Inc.,

Maintain High Efficiency Filters to Reduce Stress on Your Heat Pump.
The filter on your Heat pump is an integral part of your home’s comfort system. Without that filter, the device will quickly be subjected to an influx of debris and contaminants that can get into the machinery and the air being filtered into your home. As a result, you need to make sure you properly maintain the filters to reduce stress on your heat pump.

Change Your Filters:
High efficiency filters are designed to remove as much of the airborne contaminants in the air as possible. This is fantastic for keeping your Indoor air clean. But if you don’t properly maintain the filter, air quality can worsen and your heat pump is put under unnecessary stress. Specifically, the extremely tight knit filter, designed to stop nearly anything from getting through, gets clogged.

Now your heat pump is forced to work much harder to draw the air it needs from outside and heat or cool your home. On top of that, the filter is filled with contaminants that can start to leak back into the air supply, actually making your indoor air quality worse than it would be otherwise. That’s why it is so important to clean your filters on a regular basis (for permanent filters) and replace them if they are one time use.

Recommended Filters:
You have options as to which types of filters you use for your heat pump. Filters come in multiple options, from super high MERV rated filters that trap up to 99% of all contaminants as small as 0.3 microns.

Electrostatic filters are especially efficient because they extract contaminants of all types – from dust and mold to smoke and gas fumes. A good filtration system should effectively remove anything from the air without needing replacement too often.

Permanent filters tend to offer the best protection against airborne contaminants and generally need to be cleaned once a month. HEPA filters are often permanent and while each filter is different, these are often extremely effective at minimizing contaminants in the air without putting stress on your home’s heat pump.

Heat Pumps are a great home comfort solution for many people but they aren’t always the appropriate choice. However, there are many benefits to going with a heat pump system, so this is certainly an option you should keep in mind as you evaluate your options.

Heat pumps work by extracting heat from the air in one place and then transferring that heat to another space. For instance, in the winter, heat pumps take heat from the outside air and pump it into your house. In the summer, on the other hand, your heat pump will be able to take heat from your indoor air and pump it back outside, thereby keeping your home cool and comfortable.

Heat pumps are also extremely energy efficient because they don’t actually have to generate the heat they pump. Unlike furnaces, which take in fuel and convert it into heat, heat pumps simply harness the heat that’s already there, making them by far the more energy efficient option.

Another benefit to heat pumps is that they maintain a more constant temperature than many other types of heating systems do. Rather than pumping in a big blast of hot air and then waiting until the temperature indoors falls below a preset level before doing it again, heat pumps provide a relatively constant stream of warm air.

The initial amount of heat is smaller than what you might be used to from a furnace, but the cumulative effect means that you’ll be able to enjoy a much more consistently comfortable indoor environment.

It is important to evaluate the climate in your area before you decide to purchase a heat pump, though. These systems are extremely effective at heating and cooling your home as long as temperatures stay above the mid-thirties.

For more information on heat pumps and other heating products contact us here at Andy’s Air Inc, a Clearwater Air Conditioning Repair Company.

During warmer months, most systems will show no difference. Both straight cool systems and heat pumps use an evaporator to remove hot air from the building. Each uses a compressor to cycle refrigerant through piping that warm air passes over. In cooler months, the heat pump reverses to make use of warmer air outside the home. Heat pumps from Clearwater air conditioning repair companies can save money on energy costs, though there are limitations and one potential drawback.

Clearwater air conditioning repair businesses can install heat pumps that function best at maintaining the internal temperature of a building. Florida has a perfect climate for their operation, since temperatures are typically comfortable during winter days and rarely drop below 35 at night. This is the optimum range for heat pumps. Differences in micro-climate may negate the advantages of a heat pump, so it pays to consult with professionals in the Clearwater air conditioning repair business. Some heat pumps are designed with an emergency electric heating element for those rare occasions that temperature drops below 35.

It is worth investigating the engineering advances made in dedicated straight cool systems. The drawback to using a heat pump is that some of these advances have not been incorporated into the newer systems. Check with a Clearwater air conditioning repair business to help in choosing the best system for particular homes or businesses.

When you call Andy’s Air Inc. for your Clearwater AC repair, we understand the importance that you get “QUALITY” help and fast. We’ll have our Owner Andy Dennis, with over 25 years of being an expert air conditioning technician, out to your Pinellas County area home to check out your system as quickly as we can.

So when you are in need a Quality Clearwater Air Conditioning Repair, Call Andy’s Air and will fix it RIGHT.

You need ac repair st petersburg!

There are several reasons why your condenser is a block of ice:

• your air conditioning system may have a freon leak
• your fan motor could be bad
• your may have plugged filters or an impacted evaporator coil

If your condenser is a block of ice, be sure to turn off the system.  The system must be completely thawed before ac repair can be performed.  Once the unit thaws out, you may find that the system begins to cool again; that is until it ices up again.

Call Andy’s Air if you are looking for quality ac repair St Pete, ac repair clearwater or ac repair Pinellas County.   We are proud of our reputation for honest work, fair prices and quality air conditioning repair and installation.  Feel free to give us a call to discuss your situation over the phone, before we come out.  When it comes to ac repair st pete, we are number 1.